|
Services We Provide Our Customers:
C51A Millennium - C5 is the new high performance Category 5 cable from Brand Rex,
with typical performance up to 200 MHz. Available in UTD, FTP and STP, with a
choice of PVC or LSF/OH sheath.
PowerCat 6 UTP Cable:
A high performance 4 pair UTP cable, designed from scratch to meet the
rigorous Category 6 criteria. The cable features larger wire diameter,
central pair separator spine, and bonded pairs, all of which provide
optimum transmission performance
PowerCat 6 MOD-Clip DataGate jack:
Providing superior performance on a component level and headroom well in
excess of the current draft Category 6 requirements in link and channel
testing, the DataGate 6 MOD-Clip jack provides unsurpassed results for the
industry's most demanding applications. With its unique shuttered design
and secure plug retention, it is clear the jack has been designed with the
IT professional in mind.
PowerCat 6 patch panel: A central
element in the PowerCat 6 system solution, the patch panels feature tuned
printed circuit board technology, and the unique, patented rear cable
management tray, which ensures premium installation practices when
terminating cabling into the panel
PowerCat 6 patch cords: The key to
unlocking the performance of the PowerCat 6 channel. The PowerCat 6 patch
cords are balanced to match the PowerCat 6 jacks, thereby minimising
potential impedance mismatch, and allowing signal transmission to pass
efficiently between plug and jack interface.

|
Tb ladder
-
Maybe you'd just like us to move your existing distribution racks to
your new location during your move? No problem. We can reinstall your current
racks at your new location and even incorporate them with new requirements for
data or voice that you might have. Pictured above are two7' by 19" relay racks
connected by ladder racking, ready to receive data racks from the old location.
Again, you tell us when you'd like to move, we'll make it happen!
Maybe you'd just like us to move your existing distribution racks to
your new location during your move? No problem. We can reinstall your current
racks at your new location and even incorporate them with new requirements for
data or voice that you might have. Pictured above are two7' by 19" relay racks
connected by ladder racking, ready to receive data racks from the old location.
Again, you tell us when you'd like to move, we'll make it happen!
Maybe you'd just like us to move your existing distribution racks to
your new location during your move? No problem. We can reinstall your current
racks at your new location and even incorporate them with new requirements for
data or voice that you might have. Pictured above are two7' by 19" relay racks
connected by ladder racking, ready to receive data racks from the old location.
Again, you tell us when you'd like to move, we'll make it happen!
|
|
Datarack - One of our specialties is installation of relay racks, also called a
distribution rack. We will tailor your distribution rack to whatever cable
management plan you may have. Above you see the installation of two 19"
distribution racks with patch panels and ladder racking installed and dressed.
In this case there was a requirement for expansion; seen in the first thumbnail
of the bottom row.
|
|
Tvibsixplex - This picture shows the installation of two "sixplexes", and in this
case, they are all category 5 modules (jacks). Depending on your wishes, we can
also use modules of different colors to designate different types of service.
One, two, three, four, five, six and beyond are all possible. We also do surface
mount modules, no penetration of walls required.
|
|
Drings - Difficult cable install? No problem. We install our own cable support and
cable management solutions. We can hang our own ceiling anchors, or as in this
case the use of d-rings to provide the proper support. We specialize in neat,
clean and correct cable installations, be it voice, data or both!
|
|
Wiremold - Have a wall that jacks cannot be put into? No problem. Wire molding and
raceways is one our specialties. Depending on the amount of cable and the application,
we can mount visually pleasing wiremolding on concrete, cinder block and brick.
|
|
Rackppanel - Need a place for your LAN (local area network) and your WAN (wide
area network) to meet? We have a solution. Pictured above are two CAT 5 ninety-six
port patch panels on top, providing, workstation connectivity (LAN), with wireminders
for cable management; and directly beneath it in colors of red and orange for the
data circuits (WAN). In this application, the customer also chose to have their
phone lines terminated on yellow modules on the same panel. The phone system ports
are directly beneath the colored patch panel. This centralized approach provides
the customer with the ability to add hubs and routers to the standard 19 inch
architecture where ever they desire.
|
|
Moredrings - Have a voice and data cabling need? We can help, no matter how big
the job, we can provide you with wire management solutions that maintain your
investment in your telecommunications architecture. The picture above is of
voice and data cabling supported by "d-rings"
|
|
Wallpanel - What do I plug my patch cables from the hub into? Answer: A
patch
panel. We install wall mounted patch panels of all different shapes and sizes,
starting at 12 and going to 96+ ports. We can install a "high" density patch
panel if your space is limited. We also install "swing gate" racks. Have a fiber
optic cabling requirement? No problem, we can install that on the same patch panel
or install a fiber distribution box and patch panel.
|
|
Block110 - We can install your voice and data on "110" hardware if your application
requires it. Or if you are in need of some "cross-connecting" on your 110 block we
can help you. We take pride in the proper labeling, dressing and installation of
110 hardware.
|
|
Tia568b - We can install your CAT 5 (category 5) cabling in either TIA-568A or
TIA-568B standard, per your design. Additionally, if you have requirements for
STP (shielded twisted pair) we can handle those also. If your bandwidth requirements
are beyond category 5, we can recommend CAT 5e (enhanced category 5), CAT 6
(category 6) or fiber for your LAN installation.
|
|
Fourracks - Need a data center? We can handle the racking, wire management and
server rack anchoring. We offer a complete solution. Here you see four 7 ft relay
racks with ladder racking. The leftmost rack is for the voice internal wiring
and the PBX. The next rack is for the LAN wiring as is the one next to it. The
third and fourth racks contain the customer's routers and space for further
expansion. WAN requirements are also handled on this rack with a couple of T-1s
and three ISDN BRIs.
|
Things we do to make the most of your time and investment:
-
We utilize design software to determine how much rack space you actually have.
Or how much space will be taken up on a wall by telecommunications equipment.
-
We respond the next business day to your email and phone requests; often, sooner.
Thereby, we become involved much earlier in the planning process.
-
We tailor the installation to your needs and desires. Have specific brands of
cable or patch panels you would like to use? No problem, we can do it! Have
particular colors in mind for the jacks? We can do it! Have a particular way
you would like your patch panels laid out? Consider it done.
-
We do a neat, clean and to standard wiring installation.
Typical Installation Features:
-
Testing and certification of installed wiring with an analyzer.
-
Identification and labeling of all voice and data jacks. Custom color schemes
are available for the jacks.
-
Color matching of existing or new faceplates. Your new phone and data faceplates
will match the existing electrical and/or telecommunications trim.
-
Custom patch panel design and implementation. We tailor your patch panel to suit
your needs using design software.
-
Relay, data and server rack layout design and installation, to include all ladder racking.
-
A neat and readily expandable cable plant.
|